This page provides a collection of How-To videos and guides to support users as they learn to use the Makera Cyclone Dust Collector. For each guide and feature, a short video has also been created to provide further support and clarity to our users. Greater detail and topics can be found in the Cyclone Dust Collector Manual, and additional Videos are also available on the official Makera YouTube Channel.
¶ OverviewIn this video, we overview the key setup and features for the Makera Cyclone Dust Collector. This includes looking at how it is well suited for a range of materials and projects for your desktop CNCs, as well as how to connect to the Cyclone. We also compare the different control modes, look at basic maintenance procedures, and see how the Cyclone can also be used as an air filtration unit for laser engraving projects as well. |
|
¶ How to ConnectIn this video, we are guided through setting up and connecting to the Makera Cyclone Dust Collector. This includes the hose pipe specifications and connection ports for the Carvera Air, Makera Z1, and Carvera desktop CNCs. We also look at the multiple control modes, including how to automatically turn the Cyclone on during machine operation. |
|
¶ Air Filtration for Laser EngravingIn this video, we are guided through using the Makera Cyclone Dust Collector as an Air Filtration unit for Laser Engraving projects. This can be done by adding a pre-stage filter to the Cyclone. It is important to ensure you are only ever using the cyclone to filter materials that are safe to use with laser engraving. Its also important to understand that the Cyclone was designed specifically with the laser modules for the Carvera, Carvera Air, and Makera Z1 in mind. |
|
¶ Routine MaintenanceIn this video, we look at routine maintenance procedures for the Makera Cyclone Dust Collector. This includes the frequency and procedures for cleaning the filters, as well as when the filters should be replaced. |
|
|
|