The following recommended parameters are based on current tests. The machining speed with small diameter tools/hard materials should be slow and fast in opposite. We will conduct more tests and provide more detailed parameter recommendations in the future on our website.
Please start the test from the lower limit of the parameter, and adjust them based on the test results. For additional information and support, check out our Getting Started with CNC Machines tutorials and guides.
*RPM: SpindleSpeed(RPM) / Feed: FeedRate(mm/min) / PFeed: PlungeFeedRate(mm/min) / DOC: Depth of Cut(mm)
| Group | Tools | Aluminum | Brass | Carbon Fiber | Copper | Hardwood | PCB | Plastic | Softwood |
|---|---|---|---|---|---|---|---|---|---|
| Single Flute Metal | 1*3mm Flat End(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:300 PFeed:100 DOC:0.05 |
- | RPM:12000 Feed:300 PFeed:100 DOC:0.05 |
RPM:10000 Feed:1000 PFeed:300 DOC:0.5 |
- | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
| 1.5*6mm Flat End(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:300 PFeed:100 DOC:0.05 |
- | RPM:12000 Feed:300 PFeed:100 DOC:0.05 |
RPM:10000 Feed:1000 PFeed:300 DOC:0.5 |
- | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 2*8mm Flat End(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.15 |
RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
- | RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
RPM:10000 Feed:1000 PFeed:300 DOC:0.5 |
- | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 2.5*12mm Flat End(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 |
RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
- | RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
- | RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:2 |
|
| 3.175*12mm Flat End(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 |
RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
- | RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
- | RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:2 |
|
| Single Flute Non Metal | 1*3mm Flat End | - | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 |
- | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
| 1.5*8mm Flat End | - | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 |
- | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 2*12mm Flat End | - | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 |
- | RPM:10000 Feed:1000 PFeed:300 DOC:0.5 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 2.5*15mm Flat End | - | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 |
- | RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:2 |
|
| 3.175*17mm Flat End | - | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 |
- | RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:2 |
|
| 3.175*25mm Flat End | - | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 |
- | RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:2 |
|
| 3.175*32mm Flat End | - | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 |
- | RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:2 |
|
| 3.175*42mm Flat End | - | - | - | - | RPM:10000 Feed:1000 PFeed:300 DOC:1 |
- | RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:2 |
|
| Engraving Metal | 0.1mm*60° Engraving(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 |
RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
- | RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:1000 PFeed:500 DOC:2 |
| 0.2mm*30° Engraving(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 |
RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
- | RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:1000 PFeed:500 DOC:2 |
|
| 0.3mm*30° Engraving(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 |
RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
- | RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:1000 PFeed:500 DOC:2 |
|
| 0.4mm*30° Engraving(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 |
RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
- | RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:1000 PFeed:500 DOC:2 |
|
| 0.5mm*30° Engraving(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 |
RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
- | RPM:12000 Feed:300 PFeed:100 DOC:0.1 |
RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:1000 PFeed:500 DOC:2 |
|
| Engraving Non Metal | 0.1mm*30° Engraving | - | - | - | - | RPM:12000 Feed:1000 PFeed:500 DOC:1 |
- | RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:1000 PFeed:500 DOC:2 |
| 0.2mm*30° Engraving | - | - | - | - | RPM:12000 Feed:1000 PFeed:500 DOC:1 |
- | RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:1000 PFeed:500 DOC:2 |
|
| 0.3mm*30° Engraving | - | - | - | - | RPM:12000 Feed:1000 PFeed:500 DOC:1 |
- | RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:1000 PFeed:500 DOC:2 |
|
| 0.4mm*30° Engraving | - | - | - | - | RPM:12000 Feed:1000 PFeed:500 DOC:1 |
- | RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:1000 PFeed:500 DOC:2 |
|
| 0.5mm*30° Engraving | - | - | - | - | RPM:12000 Feed:1000 PFeed:500 DOC:1 |
- | RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:1000 PFeed:500 DOC:2 |
|
| Ball Nose Metal | 1*3mm ball nose(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 |
RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
- | RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:500 PFeed:200 DOC:1 |
- | RPM:12000 Feed:500 PFeed:200 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:2 |
| 1.5*4.5mm ball nose(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 |
RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
- | RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:500 PFeed:200 DOC:1 |
- | RPM:12000 Feed:500 PFeed:200 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:2 |
|
| 2*6mm ball nose(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 |
RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
- | RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:500 PFeed:200 DOC:1 |
- | RPM:12000 Feed:500 PFeed:200 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:2 |
|
| 2.5*7.5mm ball nose(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 |
RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
- | RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:500 PFeed:200 DOC:1 |
- | RPM:12000 Feed:500 PFeed:200 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:2 |
|
| 3.175*10mm ball nose(Metal) | RPM:12000 Feed:500 PFeed:200 DOC:0.2 |
RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
- | RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:500 PFeed:200 DOC:1 |
- | RPM:12000 Feed:500 PFeed:200 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:2 |
|
| Ball Nose Non Metal | 1*4mm ball nose | - | - | - | - | RPM:12000 Feed:500 PFeed:200 DOC:1 |
- | RPM:12000 Feed:500 PFeed:200 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:2 |
| 1.5*8mm ball nose | - | - | - | - | RPM:12000 Feed:500 PFeed:200 DOC:1 |
- | RPM:12000 Feed:500 PFeed:200 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:2 |
|
| 2*12mm ball nose | - | - | - | - | RPM:12000 Feed:500 PFeed:200 DOC:1 |
- | RPM:12000 Feed:500 PFeed:200 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:2 |
|
| 2.5*15mm ball nose | - | - | - | - | RPM:12000 Feed:500 PFeed:200 DOC:1 |
- | RPM:12000 Feed:500 PFeed:200 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:2 |
|
| 3.175*22mm ball nose | - | - | - | - | RPM:12000 Feed:500 PFeed:200 DOC:1 |
- | RPM:12000 Feed:500 PFeed:200 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:2 |
|
| Corn Bits | 0.6mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - |
| 0.7mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 0.8mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 0.9mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 1.1mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 1.2mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 1.3mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 1.4mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 1.5mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 1.6mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 1.7mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 1.8mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 1.9mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 1mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 2.1mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 2.4mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 2.5mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 2mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 3.175mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| 3mm Corn | - | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | RPM:12000 Feed:500 PFeed:300 DOC:0.3 |
- | - | |
| Drill | 0.2*3.5mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:0.5 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
| 0.3*5.5mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:0.5 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 0.4*7mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:0.5 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 0.5*8.5mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:0.5 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 0.6*9.5mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 0.7*10mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 0.8*10mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 0.9*10mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 1*10mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 1.1*10mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 1.2*10mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 1.3*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 1.4*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 1.5*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 1.6*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 1.7*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 1.8*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 1.9*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 2*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 2.1*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 2.2*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 2.3*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 2.4*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 2.5*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 2.6*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 2.7*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 2.8*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 2.9*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 3*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| 3.175*12mm Drill | RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:100 DOC:0.2 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:200 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
RPM:10000 Feed:1000 PFeed:300 DOC:1 |
|
| Chamfering Bits | 0.1mm*90° Chamfering | RPM:12000 Feed:600 PFeed:200 DOC:0.2 |
RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:500 PFeed:200 DOC:0.1 |
RPM:12000 Feed:1000 PFeed:500 DOC:1 |
RPM:12000 Feed:1200 PFeed:500 DOC:2 |
| Solder Mask Remover | 0.3mm*30° Solder Mask Removal | - | - | - | - | - | RPM:6000 Feed:400 PFeed:200 DOC:0.2 |
- | - |
*RPM: SpindleSpeed(RPM) / Feed: FeedRate(mm/min) / PFeed: PlungeFeedRate(mm/min) / DOC: Depth of Cut(mm)
Note that these settings are estimates as specific material properties can vary based on material color and manufacturer. Always take extreme care when testing laser settings, perform test cuts in a well ventilated space, always use protective eyewear, and never leave the laser unattended. Also ensure that the materials being cut and engraved are compatible with laser processing, and if not, utilize the milling spindle instead.
For additional information and support, check out our Carvera How To's tutorials and guides.
|
Settings for the Carvera 2.5w Laser Module |
||||||||||
|
Material |
Suggested Thickness (Cut) |
Laser Vector (Engrave) |
Laser Vector (Cut) |
Laser Image (Engrave) |
||||||
|
Speed (mm/m) |
Power (%) |
# of Passes |
Speed (mm/m) |
Power (%) |
# of Passes |
Speed (mm/m) |
Power (%) |
# of Passes |
||
|
MDF |
- |
1000 |
20 |
1 |
- |
- |
- |
1000 |
30 |
1 |
|
Paper |
0.1 mm |
1000 |
20 |
1 |
200 |
40 |
1 |
- |
- |
- |
|
Corrugated Cardboard |
3 mm |
1000 |
20 |
1 |
80 |
50 |
2-3 |
1000 |
40 |
1 |
|
EVA Foam |
2 mm |
1000 |
15 |
1 |
100 |
15 |
1 |
1000 |
20 |
1 |
|
Felt Fabric |
1 mm |
100 |
5 |
1 |
100 |
15 |
1 |
- |
- |
- |
|
Genuine Leather |
- |
1000 |
10 |
1 |
- |
- |
- |
1000 |
20 |
1 |
|
Engraving Rubber |
- |
500 |
30 |
2-3 |
- |
- |
- |
- |
- |
- |
|
Wooden Veneer |
0.5 mm |
500 |
20 |
1 |
60 |
50 |
1 |
1000 |
30 |
1 |
|
Soft Woods |
- |
500 |
30 |
1 |
- |
- |
- |
1000 |
30 |
1 |
|
Hard Woods |
- |
500 |
40 |
1 |
- |
- |
- |
1000 |
40 |
1 |
|
PCB Silk Screen (Light Soldermask) |
- |
100 |
20 |
1 |
- |
- |
- |
- |
- |
- |
|
PCB Silk Screen (Dark Soldermask) |
- |
100 |
30 |
1 |
- |
- |
- |
- |
- |
- |
|
Masking Tape |
0.015 mm |
- |
- |
- |
200 |
40 |
1 |
- |
- |
- |